Electro Hydraulic Thruster 18Kg

Get a Price/Quote

Product Details:

Flow Rate Adjustable (as per application)
Application Industrial Brakes, Conveyor Systems, Lifting Equipment
Mounting Type Foot/Flange Mounted
Connectivity Type Hard-Wired
Power Source Electric
Operating Pressure 4-8 bar
Sealing Type Hydraulic Seal
Click to View more
Share Your Product:

Request to Call Back Send Inquiry

Electro Hydraulic Thruster 18Kg Product Specifications

Connectivity Type Hard-Wired
Speed Approx. 55 mm/sec
Mounting Type Foot/Flange Mounted
Application Industrial Brakes, Conveyor Systems, Lifting Equipment
Flow Rate Adjustable (as per application)
Sealing Type Hydraulic Seal
Operating Pressure 4-8 bar
Force 18 kg
Power Source Electric
Structure Piston Cylinder
Efficiency High Efficiency
Temperature Range -10C to +60C
Body Material Cast Iron
Features Maintenance Free, Corrosion Resistant, Rugged Design
Accessories Terminal Box, Cable Glands, Mounting Bolts
Voltage 415 V AC, 3 Phase, 50 Hz
Type Electro Hydraulic Thruster

Product Description

Electro Hydraulic Thruster 18Kg

ELECTRICAL SUPPLY :

Unless otherwise specified, all thrusters are suitable for operation for 415 Volts,-phase, 50 Hz power supply. Thrusters for other voltages up to 600 VAC, 3-phase can be supplied against specific enquiries.

CONNECTIONS :
The Thrusters operate equally well in both directions of rotation. Therefore, the three phase supply lines can be connected with the Thrusters in any R-Y-B phase sequence. Provide adequate safety backups.

OIL REQUIREMENTS :
Thrusters are supplied without oil to avoid spillage during transportation. They must be filled with sufficient quantity of oil before installation. For all models of thrusters, it is recommended to use Transformer Oil as specified in BS : 148.

Oil capacity requirements are listed in the table below.

INSTALLATION OF THRUSTERS :
All Thrusters are suitable for vertical mounting only. After filling the thruster with required quantity of oil, install it by using the clevis and hinge pins provided. Insert the locking split pins.

Ensure that no excessive transverse forces are acting on the thrust rod. Wipe out the dust, paint or oil deposits from the operating section of the thrust rod pins by dry and clean cloth.

MAINTENANCE :
The Thrusters is designed for long trouble free service. The motor windings are designed to meet contingencies, The bearings are adequately sized.

Routine maintenance schedule includes checking the oil levels and topping them if necessary. If oil contamination is detected, drain it out completely and refill with fresh oil. Check and correct the oil leakage if detected.

Dimensions

Type	Rated Thrust Kgs (N)	Output stroke mm	Input watts	A	B	C	D	E	F	G	H	J	K	L	M	P	Q	WT (kgs)	Oil capacity liters
ST 520	18 (180)	51	90	349	51	159	19	25	13	12.7	19	16	19	32	19	110	90	14	1.85
ST 535	34 (340)		150	444		171	22	29	14	19.7		21	27	41	25	138	118	30	2.5
ST 545	45 (450)		180
ST 870	68 (680)	76	200	508	76	216	25	32	16	22.2	25	24	29	48	32	152	132	40	4.5
ST 8110	114 (1140)		250
ST 13200	225 (2250)	127	420	660	127	254	32	38	19	25.4	30	27	45	54	38	1521	132	55	9.0
ST 13300	295 (2950)		580

Superior Protection and Design

Engineered for tough environments, this thruster features IP 55 protection against dust and water ingress. Its rugged cast iron body and anti-corrosive paint extend its operational life, making it suitable for both indoor and outdoor industrial uses.

High Efficiency Operation

The electro hydraulic thruster boasts continuous duty operation and a piston cylinder design that ensures consistent force and speed. Its hydraulic seal and adjustable flow rate accommodate diverse application requirements with minimal maintenance.

Versatile Industrial Applications

Commonly used in industrial brakes, conveyor systems, and lifting equipment, this device is compatible with various mounting types (foot/flange) and accessories, offering flexibility for installation and connectivity.

FAQs of Electro Hydraulic Thruster 18Kg:

Q: How is the Electro Hydraulic Thruster 18Kg typically installed in industrial setups?

A: The thruster can be mounted using foot or flange mounting options, and comes with accessories like terminal boxes, cable glands, and mounting bolts for secure and hassle-free installation.

Q: What type of hydraulic oil should be used for optimal performance?

A: This thruster is designed for use with hydraulic oil ISO VG 32 or ISO VG 46, which helps maintain proper lubrication and extends the life of internal components.

Q: Where can the Electro Hydraulic Thruster 18Kg be effectively utilized?

A: It is ideal for heavy-duty applications such as industrial brakes, lifting equipment, and conveyor systems, offering efficient and reliable actuation in factories, warehouses, and processing plants.

Q: What benefits does the anti-corrosive paint and rugged body material offer?

A: The cast iron body and anti-corrosive paint provide enhanced durability and resistance to harsh environments, reducing maintenance needs and increasing operational lifespan.

Q: Is the Electro Hydraulic Thruster suitable for continuous operation, and what is its duty cycle?

A: Yes, this thruster supports continuous duty cycles, making it dependable for nonstop industrial processes where sustained actuation is essential.

Q: How can operators adjust flow rate and what is the speed of the device?

A: The flow rate is adjustable as per application requirements, and the thruster operates at an approximate speed of 55 mm/sec, allowing for precise control in various industrial processes.

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Other Products in 'Electro Hydraulic Thrusters' category

34-114 Kg Electro Hydraulic Thruster Price : 10000 INR/Piece Minimum Order Quantity : 01 Efficiency : High mechanical and electrical efficiency Body Material : Other, Cast Iron Accessories : Mounting brackets, Oil filling port, Fasteners Voltage : 415V AC, 3 Phase, 50 Hz Type : Other, Electro Hydraulic Thruster Application : Used in Electro Hydraulic Brake Systems, Industrial automation, Material handling equipment Mounting Type : Other, Flange / Foot Mounted Connectivity Type : Hardwired Electrical Connections Speed : Stroke completion within 3 to 5 seconds Flow Rate : Up to 0.5 L/min Sealing Type : Other, Oil Seal and Gasket Operating Pressure : Standard Hydraulic Pressure up to 10 bar Power Source : Other, Electric Motor Driven

Send Inquiry

SEND INQUIRY CALL ME FREE